Plain Hanging Tiles for Vertical Tiling
TRADITIONAL APPEAL AT AN AFFORDABLE COST
Plain hanging tiles for vertical tiling which give a
traditional appeal at an affordable cost.
- Hanging nibs designed and positioned for maximum strength
- Shape designed to improve air circulation between tile and
- Low centre of mass designed to maximise restoring moments of
tile to wind uplift
- Low step height to reduce effect of wind uplift
- Through coloured
- 60 year guarantee
For all Sales enquiries please contact our Leighton Buzzard office.
FIXING: Plain Tiles are laid broken bond in
courses with not more than 65mm headlap for roofing and not less
than 35mm for vertical tiling. Tiles are fixed with two 40mm x 3mm
aluminium nails in at least every fifth course for roofing and
every course for vertical tiling. Nail holes are located
approximately 35 mm down from the head of the tile and
approximately 40mm in from the side edges.
The information above gives the general fixing
information for the Plain tile, however for more detailed fixing
requirements please refer to either the Zonal Fixing
Method or alternatively you can request a fixing
specification from the Technical Department using the downloadable
GUARANTEE: The colour of Plain Tiles
will change with natural weathering over the years but the
integrity of the tiles carries a 60 year guarantee, from date of
supply, subject to the company's normal terms.
Forticrete Roofing Products' policy is one of continuous
improvement and the Company reserves the right to change
specifications and designs at any time without notice. The colours
reproduced within this website are as close as the
photographic processes will allow.
Where an exact colour match is critical, you are advised to
view actual tile samples.
To obtain samples either call our Leighton Buzzard office or
complete the online form.