Login    
Forgot username/password?
Forticrete – Architectural Masonry, Roofing, Cast Stone, Walling Stone, Standard Masonry and Civils

Decorative Heads

General

Decorative Heads

Although these Cast Stone heads are decorative they will carry a uniformly distributed load (UDL) of 3kN over a clear span of 1m provided that there is adequate bearing, with a minimum section of 140mm high x 100mm wide. Spans greater than 1m will require an appropriate supporting or relieving lintel (by others)

  • Standard range of sizes
  • Bespoke sizes available on request*
  • Standard range of 6 colours
  • Bespoke catalogue of colours on request
  • Manufactured from high grade aggregates
  • Specification exceeds BS requirements 


For all Sales enquiries please contact our Anstone office.

* Decorative heads of greater lenght than those shown in the tables are available  and are made in pieces.

Compressive Strength: In accordance with the updated UKCSA recommendations, all Forticrete Cast Stone is now manufactured with a design compressive strength potential in excess of 35 MPa, (35 N/mm²) when reaching concrete maturity.
Density: Typical Material Density = 2100Kg/m³
Thermal Conductivity 'K' : Exposed: 1.56 W/mK Protected: 1.46 W/mK
Water Absorption: ( Typical ): 3.5%
Drying Shrinkage: Less than 0.04%
Mortar: Mortar used for the installation of Cast Stone Dressings should not be stronger than Designation III (1:1:6).
Handling Reinforcement: Any units over 600mm in length contain one or more steel bars.These are included to comply with Health and Safety Regulations,relating to the handling of the product by site operatives.
Fixings for Support, Restrintstand Handling: ( TYPICAL ): Some Forticrete Cast Stone Dressings will incorporate 100mm stainless steel dovetail slots to restrain lateral movement in vertical units i.e. window jambs, door jambs etc. M16 sockets may also be used for handling purposes in the factory.
Cast Stone Colours

Bespoke Colours

Forticrete has a library of over 400 Cast Stone colours that can be reproduced with accuracy at any time. Should you require a specific colour that is not in the catalogue, this can be provided at a supplementary cost.

To order standard colour samples please complete our online request form here

rectangular head
chamfered heads
splayed sizes
keystone 456
[icon] - Adobe PDF Cast Stone Data Sheet 1 - Supporting Lintel (105 KB) Click here to download
[icon] - Adobe PDF Cast Stone Data Sheet 3 - Relieving Lintel (87 KB) Click here to download
[icon] - Adobe PDF Cast Stone Dressings Brochure Sept 2011 (2 MB) Click here to download
-
[logo] Forticrete
web designers
Web Designer
Skip to contentSkip to navigationSkip to searchSkip to homepageSkip to sitemapSkip to faqSkip to terms & conditionsSkip to accecssibility