Frequently Asked Questions
Can the Decorative Heads accept any loadings from masonry above?
The Decorative Heads will accept a load of 3KN over a clear span
of 1 metre providing there is adequate bearing and but must be a
min 140mm high x 100 thick.
Structural Heads can be made up to a max length of 2.40m.
In all instances we advise guidance is sought from a Structural Engineer as to the capabilities of Decorative and Structural Heads.
Your feedback is important to us. Why not take a moment to let us know how helpful you found our answer by clicking on one of the numbers below, where 5 is the most helpful.